This process will wipe all your data and re-install the Oxygen OS. Method 2 – Unbrick OnePlus 3 and Install Oxygen OS again Now run the following command on the window.Īnd wait for it to finish.Then reboot into the system. Shift + Right Click anywhere in the folder and Open Command Window. Now open the ADB folder in which you saved the Oxygen OS zip file (Update.zip) in Step 10. Connect your phone to the PC with USB cable. Turn off the phone and Press Volume Down + Power button to boot into recovery mode. The same file that you downloaded above in Step 1 c). Now copy the Latest OxygenOS zip in this folder. This will create an ADB folder on your Windows C Drive (C:\ADB). Install the ADB and Fastboot drivers on your Windows PC from here (Check Second Methods in this guide. If the phone doesn’t boot up into system and stuck on Oneplus Boot logo, then follow the next steps. Now Disconnect phone from PC and boot into system. Clear start in the top left corner and wait for it to finish (green text will come). Once completed, Open the Oneplus 3 Recovery tool folder (Step 1 b)) and run the file MSM Download Tool.exe, using Admin privileges.
Update its driver using the Qualcomm driver provided (for 32bit windows, select x86 folder for 64bit windows, select 圆4 folder).
Select ‘browse’ button and go to and choose the folder where you extracted driver file’s in step 1 a). Now right click on it, and select ‘update driver’.
IF you can’t see the Phone than Keep volume up pressed till your device shows in device manager. Now you will see your phone in the Device Manager with the name of. Press Windows Button + R and now type devmgmt. Now open Device Manager on your Windows PC. Now Press Volume up button for 10 seconds and while keeping it pressed, connect your phone to PC. After that, Press the power button for 40 seconds to turn off the Oneplus 3 completely. Use the appropriate key as mentioned on that screen. Select option 7 ‘Disable Driver Signature Enforcement’. Now PC will restart and Now you will see a list of startup settings that you can change. Then select Advanced Options > Startup Settings > and then click on Restart. Once your computer has rebooted you will be able to choose the Troubleshoot option. To do this, You need to restart your PC, but this time, you have to hold the shift key while you click Restart. To do so follow the below mention steps:. Turn off Driver Signature Enforcement on Your Windows PC. Once all these files are saved on your desktop.
0 kommentar(er)
